DPIAnalyzer

What Is a cm/360 Calculator and Why Does Turn Distance Matter?

A cm/360 calculator works out how many centimetres you must slide your mouse to turn a full 360 degrees in a game, using your DPI, in-game sensitivity and the game's yaw value, so you can match your aim across games and mice.

Try it now: the free cm/360 Calculator runs in your browser with no download or sign-up.

Open the free cm/360 Calculator

Sensitivity numbers mean different things in every game, but distance on a mousepad does not. cm/360 is how far you physically slide the mouse to spin a full circle, which makes it the most intuitive way to describe your aim: it maps directly to your mousepad. That is the real-world representation of your true sensitivity, and it survives a new game or a New mouse untouched.

The calculation needs one extra ingredient beyond DPI and sensitivity: the game's yaw constant, the angle each mouse count turns your view. Once you know it, cm/360 becomes a general mouse sensitivity you can carry anywhere, instead of a number that only works in one title.

I keep a single cm/360 figure written on a sticky note for each game I play seriously. After a reinstall or a mouse swap, that one number gets me back to my old aim in a minute. Our cm/360 Calculator does the maths: enter DPI, sensitivity and yaw, read the distance in centimetres and inches, or use reverse mode to find the sensitivity for a target distance.

How Does eDPI Relate to cm/360?

eDPI is DPI multiplied by in-game sensitivity, and within one game it fixes cm/360: equal eDPI gives equal turn distance, but across games the same eDPI produces different distances because each game uses a different yaw value.

eDPI is a measure of effective mouse sensitivity, the product of DPI and sensitivity, which makes it the fairest way to compare it to your friends in the same game. For example, 800 DPI × 0.5 sensitivity = 400 eDPI, and any setup that keeps that product moves the crosshair identically after you switch DPI.

It breaks between games. Titles use different sensitivity scales and parameters, so the same sensitivity value can mean two different things in two games. That is exactly the gap cm/360 fills, because it converts the setting into a physical distance.

So the two numbers work as a pair: eDPI for quick comparisons inside one game, cm/360 for anything that crosses games or hardware. I check both whenever I copy settings from someone else.

How Do You Calculate cm/360?

You calculate cm/360 by dividing 360 degrees by the game's yaw value times your sensitivity, dividing that by your DPI, and multiplying by 2.54 to turn inches into centimetres.

The formula needs three inputs, and the game's yaw constant is the one people forget. Because DPI is counted per 1 inch (2.54 cm), the result converts cleanly into centimetres. The single number you get describes how far your hand moves the crosshair the same amount in any game, for the same hand motion. Common yaw values:

GameYaw valueNotes
CS20.022Shared by Source-engine shooters
Valorant0.07Turns faster per count than CS2
Other gamesVariesCheck the value for your title

Our own example: 800 DPI and 1.2 sensitivity with the CS2 yaw of 0.022 gives about 43.3 cm for a full turn. That physical distance for a full 360° is easy to check by hand: aim at a visual reference, move the mouse without lifting it until you have turned once, measure with a ruler on your desktop, and Repeat for any games you play. Games such as CS:GO, Overwatch and Apex Legends each need their own yaw.

How Do You Change DPI Without Changing cm/360?

You change DPI without changing cm/360 by lowering your in-game sensitivity by the same factor you raised DPI, which keeps eDPI and turn distance identical.

The conversion rule is short: new sensitivity = current sensitivity × (current DPI ÷ new DPI). In practice you Multiply your current sensitivity by your old DPI and divide by the new DPI, so both setups share the same eDPI and you never relearn your aim. The feel stays the exact same feel.

The proof is in the formula. cm/360 = (360 ÷ (yaw × sensitivity)) ÷ DPI × 2.54 depends only on the product of DPI and sensitivity, so when that product holds, the distance does not change. Tools that show your turn distance before and after let you sanity-check the result, and the yaw is the same for every Source-engine games title at 0.022, while Valorant uses 0.07.

I always run that check after converting. A typo in one field is easy to miss, and a turn distance that suddenly halves is impossible to miss.

When Should You Recalculate Your cm/360?

You should recalculate your cm/360 whenever you change mouse, DPI or game, or when you discover your real DPI differs from what the box claimed.

Hardware changes are the obvious trigger. A higher DPI means more sensor counts per inch, so the camera moves faster until you compensate; done right, you have simply doubled your sensor resolution without changing feel. Tools that support 100+ games make that conversion quick.

Accuracy is the other reason. If you set your current DPI from the box and later measure something different, the new DPI you want and your real effective sensitivity no longer match your old numbers, so the distance has drifted.

Tools that show the 360° turn distance before and after make mistakes obvious; the classic slip is forgetting to lower sensitivity after a DPI bump, which makes aim wildly faster, and Comparing raw sensitivity with friends hides the problem. Your target is a cm/360 you can hit comfortably on your mousepad.

Converting correctly means muscle memory carries over. The only side effect is sensor resolution: very low DPI can feel slightly choppy, and the usual sweet spot is 400–1600 DPI.

Which Mistakes Ruin a DPI or Sensitivity Conversion?

The mistakes that ruin a conversion are changing DPI without lowering sensitivity, leaving Windows acceleration on, chasing extreme DPI and comparing raw sensitivity instead of eDPI or cm/360.

Each one breaks the link between your hand and your view in a different way:

  • Old DPI step gone, sensitivity unchanged: raising DPI without adjusting the game makes aim far faster than before.
  • Raw input ignored: Windows pointer speed off its default notch and acceleration switched on skew the feel outside the game.
  • Very high levels of DPI: past the sensor's native range you gain nothing and may add noise.
  • Raw DPI or sensitivity comparisons: two players' numbers mean nothing without the other half of the pair.

The fix for all four is the same: convert with the formula, keep acceleration off, and confirm the new cm/360 matches the old one. Most "my aim feels wrong after the new mouse" stories I hear trace back to the first mistake.

How Do DPI and Sensitivity Shape Your Turn Distance?

DPI and sensitivity shape your turn distance together: DPI sets how many counts the mouse reports per inch, sensitivity scales those counts in the game, and cm/360 shows the combined result in centimetres.

DPI belongs to the mouse. Keep Windows at its 6th notch, switch Enhance pointer precision off because it adds acceleration, and avoid Chasing huge DPI numbers beyond the sensor's native DPI, which can add jitter. 400–800 DPI is a safe base for most players.

Sensitivity belongs to the game. Does higher DPI mean higher sensitivity? On its own, yes: more counts per inch move the view faster, which is why the in-game value has to drop to compensate. Higher DPI then only gives finer steps.

Together they describe your real mouse sensitivity. cm/360 is simply that combination expressed as a distance you can feel, which is why it beats either number alone.

What eDPI and cm/360 Do Pros Use in CS2, Valorant and Fortnite?

Pros in tactical shooters use low settings: Valorant pros average around 280 eDPI, CS:GO pros average just under 900, and Fortnite pros cluster between 32 and 82 on Fortnite's percentage scale, all of which mean long turn distances.

Each game has its own competitive ranges, so pro numbers only compare within a game. Current rough guides put CS2 around 600–1200 and Valorant around 200–600 eDPI, and they line up with the average eDPI for professional CS:GO players:

GameTypical pro settingWhy
ValorantAround 280 eDPIOne shot can decide a round, so precision wins
CS:GO / CS2Just under 900 eDPIPrecise aim with spray control
Fortnite32–82 eDPI (percentage scale)Precise shooting plus building

As a worked example, 400 x 1.80 gives 720, close to the CS:GO pro average, but the right setting is the one you are most comfortable playing with. In a battle royale like Fortnite, settings can make or break your game, and players compare everything, from gear to setup. Pro numbers are a starting point for flick and tracking aim, not a rule.

How Do You Match a Friend's Sensitivity Exactly?

You match a friend's sensitivity exactly by calculating their eDPI, then dividing it by your own DPI to get the in-game sensitivity you need in the same game.

The steps are quick once you have both DPI values:

  1. Player 1 (your friend): note their DPI and sensitivity, for example a DPI of 800 at a sensitivity of 0.5.
  2. Multiply those to get their eDPI, here 400.
  3. Player 2 (you): note your own DPI, for example a DPI of 1600.
  4. Divide their eDPI by your DPI: you need a sensitivity of 0.25.
  5. Check the game's sensitivity format before entering the value.

The result is identical aim speed in that game. The distance matches too, which you can confirm with a cm/360 calculator. Screen settings play no part, because the result does not depend on your screen's size or resolution.

Frequently Asked Questions

How Do You Measure Your cm/360 by Hand?

You measure cm/360 by hand by turning a full circle in game without lifting the mouse and measuring how far the mouse moved with a ruler.

The hand method confirms the calculator, and it is how you re-derive a setting after Fixing your DPI. If the measured and calculated numbers disagree, your DPI or yaw value is probably wrong.

Can eDPI Compare Sensitivity Between Games?

No, eDPI cannot compare sensitivity between games, because each game converts mouse counts to rotation differently.

Use eDPI inside one game, guided by personal preference, and use cm/360 everywhere else. A Valorant eDPI of 300 and a CS2 eDPI of 300 produce very different turn distances, because the yaw values differ by more than three times.

What Is a Mouse DPI Calculator?

A mouse DPI calculator converts your in-game sensitivity when you change DPI so your aim keeps the same feel.

It also matches friends: to set the same eDPI value as your friend who uses DPI 1000 and sensitivity 0.8 (800 eDPI), choose the right sensitivity type, such as decimal sensitivity, and at DPI 500 your needed sensitivity is 1.6. No more excuses.

How Do I Keep the Same Sensitivity When I Change DPI?

You keep the same sensitivity by multiplying your old sensitivity by your old DPI and dividing by the new DPI.

Going from 800 DPI with 1.0 sensitivity to 1600 DPI gives 1.0 × (800 ÷ 1600) = 0.5, the same eDPI and the same turn distance, adjusted by the same factor as the DPI change.

What Is eDPI in One Line?

eDPI is your mouse DPI multiplied by your in-game sensitivity.

400 DPI / 1.6 sens and 1600 DPI / 0.4 sens both give 640, so a correct conversion keeps eDPI fixed. Within one game, equal eDPI also means equal cm/360, which is why the two numbers are used together.

Does Higher DPI Mean Higher Sensitivity?

Higher DPI means higher sensitivity only if you leave the in-game value unchanged; convert correctly and overall sensitivity stays the same.

Very high DPI has costs too: the sensor can reach its limits and add smoothing, where it tries to predict movement instead of reporting it.

Will Converting My DPI Change My Aim?

No, converting your DPI correctly does not change your aim, because eDPI and cm/360 stay the same.

The common reasons to convert are an old DPI step missing on a new mouse, Copying a pro at your preferred DPI, or Experimenting with higher DPI for smoother tracking.

What DPI Should I Use for Gaming?

Most players should use 400 to 800 DPI and set the rest with in-game sensitivity.

Most pro gamers sit between 400 and 800, even though gaming mice usually offer 400 to 1600 and far beyond. Pick the DPI that lets you reach your preferred cm/360 without running out of pad.

What eDPI Should I Use for My Game?

The eDPI you should use depends on the game: low for Fortnite and Valorant, medium for CS2, and higher for faster games.

The general trend: Fortnite players aim for a low range eDPI because of precise aim for shooting and building; in 2019, over 300 Fortnite pro players and streamers sat between 32 and 82, using sensitivity in %.

What Is the eDPI of 400 DPI at 1.80 Sensitivity?

400 DPI at 1.80 sensitivity is 720 eDPI, close to the average professional CS:GO setting.

CS:GO pros sit lower than casual gamers to avoid spray, yet the game still needs a very high real mouse sensitivity compared with rivals: the pro average is just under 900, and some of the world elite run over 1500.

Is Mouse Acceleration Good for Gaming?

No, mouse acceleration is bad for gaming because it destroys any muscle memory you build at a fixed sensitivity.

Acceleration moves the cursor proportionally to how fast you move, so the same motion of your arm or wrist gives different angles moved in-game, and that destroys any muscle memory. In a game with a low time to kill, where a single bullet can decide a duel, perfect aim matters, which is why Valorant pros average 280 eDPI with acceleration off. DPI, also called counts per inch (CPI), is set with a button on the mouse or in related software, and it applies to Windows, the browser and games alike, while sensitivity is an in-game setting and a more reliable way to adjust speed. The converted settings feel identical only when acceleration stays off.

Related Tools and Guides