What Is Mouse Sensitivity and What Does a Sensitivity Test Show?
Mouse sensitivity is a multiplier that decides how far the cursor or crosshair moves for each bit of mouse movement, and a sensitivity test shows that multiplier in action so you can see how DPI and sensitivity combine into the speed you actually feel.
Try it now: the free Sensitivity Test runs in your browser with no download or sign-up.
Open the free Sensitivity TestThe final speed always has two layers. Hardware DPI sets how many counts the mouse reports, and software sensitivity scales those counts in Windows or in a game. Change either one and crosshair movement changes, which is why two people can describe the same feel with completely different numbers.
Our Sensitivity Test makes that visible. A grey dot follows your pointer exactly, while a cyan dot follows the same motion multiplied by the value you pick, from 0.25 to 4. Move your real pointer 400 px with the slider at 0.5 and the cyan dot travels 200 px; set it to 2 and it travels 800 px. It is a demonstration of a sensitivity multiplier, not a change to your system settings.
Once the idea clicks, the useful question becomes how far your hand moves for one spin a full circle in a game, because that distance is what keeps the same physical feel across setups. The rest of this guide covers that measure, conversion between games, and how to settle on a sensitivity you can trust.
Why Is cm/360 the Truest Measure of Sensitivity?
cm/360 is the truest measure of sensitivity because it is a physical distance on your mousepad, so it means the same thing in every game and survives changes to DPI or software.
Sensitivity numbers do not travel. Each game interprets mouse movement differently, so a 2.0 setting in Counter-Strike 2 feels nothing like a 2.0 setting in Valorant. A distance does travel: when the 360° turn distance identical in two games, the same hand movement aims the same in both.
Starting points are well established. Many players begin around 30–40 cm/360, and many pros sit near 30-50 cm per turn, then adjust from there. Short distances suit wrist aimers with small pads; long ones suit arm aimers who value precision.
I measure it once per game and treat it as my real sensitivity. Everything else, including DPI and the in-game value, is just a way to reach that distance on a given mouse.
How Is DPI Different From Sensitivity?
DPI is a hardware setting that controls how many counts the mouse sensor reports per inch, while sensitivity is a software setting that scales those counts; the speed you feel is the product of both.
DPI is a mouse setting, not a game setting, so it stays with the mouse from game to game. The relationship is simple: Mouse DPI × In-game Sensitivity is the effective speed that every game uses to handle mouse input. Here is how the two layers compare:
| Aspect | DPI | Sensitivity |
|---|---|---|
| Where it lives | In the mouse (hardware) | In Windows or the game (software) |
| What it does | Counts per inch the sensor reports | Scales those counts |
| Typical values | 400 and 800 are the most common | Varies by game; Valorant pros 0.3–0.6, CS:GO pros 1.5–2.5 |
| When to change it | Rarely; pick a base and keep it | To fine-tune feel inside each game |
Most pros pick a moderate DPI and fine-tune with sensitivity, because very high DPI with very low sensitivity gains nothing. If you are unsure of your real DPI, measure it with the DPI Analyzer before you tune anything else.
How Do You Find Your Ideal Mouse Sensitivity?
You find your ideal mouse sensitivity by starting from a common mid-range turn distance, testing it in practice with tracking and flicks, and adjusting in small steps until you neither overshoot nor feel slow.
A structured approach beats guessing:
- Mid-range setting first: start around 800 eDPI or a turn distance in the 20–50 cm/360 band, depending on arm or wrist aiming.
- Lower cm/360 is faster: if you feel slow, shorten the distance; it also needs less desk space per turn.
- Longer distances feel slower and more precise, so lengthen them if you keep missing small targets.
- Test in a practice range: try strafing while following a bot's head, then practise switching targets quickly.
- Settle the speed vs precision trade-off, then stop changing things.
Pro numbers are context, not targets. A typical Pro Sensitivity Range runs 0.3-0.6 in Valorant and 1.5-2.5 in CS:GO, but those sit on top of each pro's DPI and pad. In my experience the right setting is the one where flicks land without correction and long tracking does not tire your arm.
How Do You Convert Sensitivity Between Games?
You convert sensitivity between games by keeping the 360° turn distance the same, which means scaling your sensitivity by the ratio of the two games' yaw values and adjusting for any DPI change.
Yaw is the hidden constant behind every game. It is a per-game constant, and the ratio between two games' yaw values decides how much the number changes. Converters cover 100+ games and take settings from a source game and apply them to another target game, matching distance rather than matching raw sensitivity, because distance is the one number that means the same thing in every game:
| Game | Yaw value |
|---|---|
| CS2, CS:GO and other Source-engine games | 0.022 |
| Valorant | 0.07 |
| Overwatch 2 | 0.0066 |
| Fortnite | 0.00556 |
Distance works in either unit. Some tools show in/360 next to centimetres, and most competitive players fall between 20 cm and 50 cm per 360°. As long as the turn distance matches, your aim feels the same in both games.
Where Does eDPI Fit in Sensitivity?
eDPI is DPI multiplied by in-game sensitivity, which is useful for comparing settings inside one game but cannot compare settings across games.
It bridges the two layers in one figure. DPI is Hardware-Based and describes Sensor Capability over every inch of movement, which gives Speed Control over pointer/crosshair speed; sensitivity is Software-Based. eDPI multiplies them, so two setups with equal eDPI feel identical within the same game.
The catch is the game boundary. The same eDPI produces very different turn speeds in Valorant and CS2, because their yaw values differ. Converting through distance or yaw is the correct cross-game method.
Use eDPI for quick comparisons with friends in the same title, and use cm/360 for everything else. Our eDPI Calculator and cm/360 Calculator handle both.
How Do You Adjust Mouse Sensitivity on Windows, Mac and in Games?
You adjust mouse sensitivity in three places: the operating system's pointer speed, the game's own sensitivity setting, and the mouse's DPI in its software, and for gaming the game setting is the one to tune.
Operating-system sensitivity is Software Processing inside the operating system or an app. In Windows, open Settings from the cog- or gear-shaped icon in the Start menu; moving the slider to the right speeds the pointer up, and left makes it slower/more accurate. On a Mac, Windows or Mac settings work the same way, and the speed you see depends on your monitor size too.
Leave Windows on its default and turn off extras. Leaving acceleration on through Enhance pointer precision or in-game acceleration breaks the 1:1 match between hand and view, and Built-in acceleration in some games defeats any fixed conversion.
Then do the Fine-Tuning in the game, where sensitivity sits alongside your other aim settings. That keeps the desktop predictable and the in-game feel exactly where you want it.
What Mistakes and Limits Affect Sensitivity Conversion?
The main mistakes are copying eDPI between games, forgetting a DPI change and leaving acceleration on, and the main limit is that conversions match hipfire turn speed but not scoped or zoomed aim.
These are the problems I see most often:
- Converted hipfire sensitivity is the only thing a converter promises to match precisely; it does not cover scopes, and it carries straight over only for hipfire.
- Zoomed aim uses separate multipliers, so check it in a practice range after converting.
- 400–800 DPI is the usual base; going above 1600 rarely helps unless a game needs it.
- Sensor smoothing can appear at extreme DPI, which is why higher DPI paired with lower sensitivity is only sometimes better.
- Keep muscle memory consistent across all FPS titles by converting rather than re-tuning from scratch.
Good converters accept a different DPI for each game, so a DPI change is not a reason to start over. If something still feels off after a correct conversion, the cause is usually field of view or a scope multiplier rather than the conversion itself.
Frequently Asked Questions
What Is a Sensitivity Converter?
A sensitivity converter changes your sensitivity from one game to another so the same hand movement turns you the same amount in both.
It uses Target sens = Source sens × (Source DPI × Source yaw) ÷ (Target DPI × Target yaw). For example, Valorant at 0.4 sensitivity and 800 DPI gives about 40.8 cm per turn, which becomes ≈ 1.27 sensitivity in CS2 at the same DPI.
What Is Yaw in Mouse Sensitivity?
Yaw is how many degrees your view turns per mouse count at sensitivity 1, and every game uses its own value.
Yaw is the degrees your view rotates per mouse count at sensitivity 1, a fixed rate per game. Source-engine games and TF2 use yaw 0.022, Valorant uses yaw 0.07, so CS2 sens ≈ Valorant sens × 3.18; Overwatch 2 uses yaw 0.0066 and Fortnite uses yaw 0.00556. To convert, keep the 360° turn distance equal.
Do Both Games Need the Same DPI?
No, both games do not need the same DPI, because DPI belongs to the mouse and a converter can account for different values.
The classic error is Forgetting DPI: if you changed DPI between setups, enter both values so the maths stays correct. A converter that accepts a separate DPI per game handles this automatically.
Will My Aim Feel Exactly the Same After Converting?
Your hipfire aim will feel the same after converting, but scoped and zoomed aim may still differ.
A converter matches hipfire turn speed exactly. Scoped aim and ADS use scope multipliers that vary per weapon, and differences in Field of view and aspect ratio change how fast a turn looks, so expect an exact match only in hipfire.
Why Can't I Copy My eDPI Between Games?
You cannot copy eDPI between games because each game turns the same eDPI into a different amount of rotation.
Copying eDPI across games gives the wrong feel; convert through yaw instead. eDPI is a universal number only across different setups in one game, such as 800 DPI × 2.0 sens = 1600 eDPI.
How Do You Calculate Mouse Sensitivity?
You calculate mouse sensitivity by noting your current DPI and in-game sensitivity, then applying the conversion formula or a converter to find the equivalent value elsewhere.
Most players start from Popular DPI Settings: 400 is the Classic choice and 800 the Most Popular. With those in hand, the maths takes seconds.
How Do I Find My Perfect Sensitivity?
You find your perfect sensitivity by testing several settings in practice, starting mid-range and adjusting until your aim feels controlled.
Balanced sensitivity gives fewer missed shots and helps you Avoid Over/Under-shooting: lower it if you overshoot, raise it if you feel sluggish, and give each change 2 weeks before judging.
How Do I Increase or Change Mouse Sensitivity?
You increase or change mouse sensitivity in your system settings for the desktop and in each game's settings for aiming, ideally using a converter to keep games consistent.
In Windows, the pointer speed setting lives under Settings > Devices > Mouse as Cursor speed; on a Mac, open Apple System Preferences, choose Mouse and adjust Tracking Speed. In games, look in the controls or gameplay area. A converter helps keep your aim consistent across different games, and it fixes the moment when your aim completely disappeared after a switch. With Consistent Aim comes Muscle Memory and Skill Transfer between titles, which builds good shooting habits. Done well, Instinctive Aiming follows: your hand knows exactly how far to move to strike a target. The Accuracy vs Speed trade-off stays: high sensitivity suits quick "flicks", low sensitivity gives stable tracking and easier little adjustments. Start from your current DPI and in-game sensitivity, apply the formula, and you have the equivalent sensitivity in any game.